| Specification: | Hydro-Cure® melt blown polypropylene filters are designed for sediment removal from potable water. They are made to provide high flow rates with minimum pressure drop. Flow rates of up to 5 gpm per 1 0" length are recommended and should not exceed 10 gpm per 10" length for optimal efficiency. The maximum operating temperature is 125° ( 52° C) . Hydro-Cure® melt blown filter cartridges are made of polypropylene resin meeting FDA regulation 21 CFRL 77, 1520 ( c) 1.1. No binders, lubricants or anti-static agents are used in our manufacturing process.
Filter cartridges are available in 1, 5, 25, and 50 micron ratings and will fit most standard filter housings. Standard filter lengths of 9.8" , 20" , 30" and 40" are available. Cartridges are individually shrink wrapped and labeled. Hydro-Cure® sediment filters have the micron rating embossed on the side of every cartridge for easy identification.
Applications Include:
Drinking Water, Reverse Osmosis, Food & Beverages, Hotels, Housing
Complexes, General Industrial Filtration
Product Information
5 Micron - 10 Inch
1 Micron - 10 Inch
10 Micron - 10 Inch
1 Micron - 20 Inch
5 Micron - 20 Inch
10 Micron - 20 Inch
1 Micron - 30 Inch
5 Micron - 30 Inch
MB0509880006
MB0109880005
MB1009880198
MB01200000029
MB0520000009
MB1020000058
MB130000023
MB053000007 |
Itrademarket Priority
)